Clean engines run cooler, look better & last longer! GUNK®
Original degreasing formula for cars, trucks, power mowers,
marine, heavy-duty rigs, farm equipment and tractors as well as
industrial machinery. Clean your engine with GUNK® Original and
then protect it with GUNK® Shine.
APPLICATIONS:
• Removes Tough Grease & Oil Build Up
DIRECTIONS: Do not start you engine after you have applied GUNK® Original until
entire engine is properly rinsed. Rinsing is necessary to properly clean engine
and to avoid potential fi re hazard. SAFEGUARD OUR ENVIRONMENT. USE THE
MINIMUM AMOUNT OF RINSE WATER NECESSARY AND SEE DISPOSAL STATEMENT
BELOW. 1. Engine must be off and cool. 2. Care must be taken with all underhood
wiring and electronic sensors or components. Cover any open carburetor or
intake system openings. Cover exposed electrical and electornic components
(uncovered cracked, frayed wires or engine computer units can shor tcircuit). 3.
Shake well and apply generously to dry engine. Make sure to cover all dirty and
greasy surface areas with GUNK® Original. Wipe overspray from exterior body
surfaces with a wet cloth quickly to avoid de-waxing or streaking paint. 4. Allow
GUNK® Original to soak for 10 to 15 minutes. Brush unusually heavy deposits
to break up grease and dirt. 5. Rinse all areas with a fi ne stream of water from
top down. Minimize rinse water in areas that can cause performance problems
(electronics & intakes). 6. When complete, remove added coverings and replace
any removed parts. Start engine and idle 15 minutes to assure complete drying.
Avoid use of GUNK® Original on tile, asphalt, black top, or other surfaces aff ected
by petroleum solvents.